DURAMOUNT 7-S1
For use with our DES Series
load cells

Description:

The Duramount 7-S1 combined with the LCC-DES1 plated alloy steel, or the stainless steel and hermetically sealed LCC-DESX double ended shear beams, provides a low profile, sealed weighing assembly ideally suited for medium to high capacity tank and hopper scales and all types of process weighing/control in most types of industries and environments.

The uniform design allows the assembly to be bolted to the floor or structural support and the tank support without requiring additional mounting plates, load buttons, safety stops or attachment hardware for checking.

The Duramount 7-S1 is available with USDA approved epoxy painted tool steel or stainless steel.

Applications:

Powder & Bulk Processing Medium to High capacity Tanks & Hoppers Food & Beverage Handling
Mixing, Blending & Batching Level & Inventory Control Hostile Environment

Warranty:
5 Year Structural Warranty

Dimensions:
Capacity W" L" BP1" BP2" TP"
(square)		 TPL"
(square) 		J"
2 Plcs.		 H" T"
Dia.
1K, 1.5K, 2K, 2.5K, 3K,5K
5.00
9.25
 3.75
 6.25
 4.0
 2.75
 0.50
 5.13
 0.56
10K, 15K, 20K, 25K

8.00
12.00
 6.00
7.50
 8.0
 6.0
 0.75
 7.90
 0.78
50K, 75K 12.00
16.25
 9.00
11.50
 9.00
6.50
 1.00
 9.30
 0.78
*100K, 125K 20.00
23.50
 12.00
12.00
 10.00
 8.00
 1.50
 11.75
 1.12

*For capacities 100K, and 125K request model Duramount 7.

Installation:

Figures 1 through 4 illustrates the preferred orientation of a double ended shear beam when installed under TANKS or HOPPERS. The long axis of the cell should be at a right angle to a line drawn from the center of the tank/load. Alternately the long axis of the load cell should point in line with any recurring force, such as in TRUCK SCALES.

©2004 Load Cell Central, All Rights Reserved