440PM Panel Mount Scale Display

Panel Mount Scale Display

Features

  • 1" tall 6-digit LED display
  • Stainless steel panel-mount enclosure suitable for use in washdown areas
  • Full numeric keypad for easy data entry
  • Selectable 5-point calibration for improved accuracy
  • 20-bit A/D with 60 samples/second conversion rate
  • Direct to PC/PLC output via RS232, RS485, or USB by using an adaptor
  • Powers up to 12 x 350 ? or 24 x 700 ? load cells
  • Digital port for relay control and remote operation
  • 32K RAM provides 500 ID storage (part, truck, etc.)
  • Easy setup
  • Toll Free Technical Support

Reviews

Online ordering coming soon

There are no reviews yet for this product. Write a Review

Share this page

add to cartProduct Pricing

Part No.DescriptionPriceQty.
440PMPanel Mount Batch Weighing Indicator, NTEP Approved$1,210.00

Additional Options
Part No.DescriptionPriceQty.
OP400A/OAnalog Output Option, 0-5VDC, or 4-20mA$201.00

OP400A/O-R4Analog Output Option, 0-10VDC, or 4-20mA$201.00

OP400Q/DQuck Disconnect for the Scale Connection, Includes Mating Connector$125.00

OP440R/MRelay Board 8-Channel, Mounts Inside the 440 Enclosure$209.00

add to cart

Load Cell Central's 440PM scale controller is the same as our model 440 except that it's panel mountable.  The versatility of the LCC 440PM allows you to perform a number of tasks.  These range from basic weighing operations to more complex tasks such as controlling batches, check-weighing, or bulk-loading.  The LCC 440 includes 16 programmable instruction sets (macros), and provides you with the capability of designing the printed record to satisfy your specific requirements.  Compact in size and weight, the system is housed in a rugged stainless steel enclosure which can be panel mounted or placed in a control console.  Gaskets are provided to seal the unit to the panel or console in which it will be mounted.  One-inch-high, seven-segment LED characters make it easier to read from a longer distance than most digital indicators.  Brightness can be adjusted to suit conditions.  The keyboard features large keys which give you tactile and audible confirmation of input.
From gross, tare and net weighing to sophisticated setpoint event monitoring, applications are unlimited for the user who is capable of writing a BASIC program.  For those who prefer turnkey products, Load Cell Central offers a constantly growing number of application-specific programs at little to no additional charge, or we can write a custom program for your application. 
The LCC 440PM is programmable in an easy and flexible macro language called Scale Basic™.  In addition to the built-in modes of operation, Scale Basic allows you to customize the operation of the LCC 440PM to meet your application requirements.  The Scale Basic language provides various commands and functions that include:  Math operations, I/O control, setpoints, timers, data entry, ID storage, message display, and program sequence control among others.  Programming the LCC 440PM can be performed through the keyboard or a PC using the optional EZ-LINK™ software that simplifies setup and programming.

Brochures

Pre-Programmed Modes

  • MODE 0 - Normal
    Basic gross, tare and net weighing.
  • MODE 1 – Fill to Setpoint
    Single setpoint fill with relay output control and weight print.
  • MODE 2 - Over/Under Checkweigh
    Provides 3 TTL outputs and 2 setpoints to indicate "Over", "Under" and "Between" weight conditions.  Outputs can activate lights or alarms.
  • MODE 3 – Vehicle Weigh-In/Out with Totals
    Weigh-In/Out program for up to 500 vehicles; maintains running totals for each vehicle; provides reporting functions.
  • MODE 4 - Multi-Container/Axle Auto Weighing
    Auto weighs and prints each weight placed on the scale; each weight is sequentially numbered and accumulated; the total can be printed manually or automatically; provides for traffic light control.
  • MODE 5 - Auto Axle Weigh (Long Scales)
    Same as Mode 4 but previous axles are auto-tared.
  • MODE 6 – ID Tare, Print and Total
    Provides tare entry and recall by ID; prints ID, sequence # and GTN weights; keeps running totals by ID; provides reporting functions.
  • MODE 7 - Peak Hold Mode
    Display or print the peak gross or net weight detected.

Options

  • Parts Counting 
    Parts counting and weighing program.
  • 12-28VDC Operational
    Low voltage power supply.
  • Analog Output Module 
    Fully isolated 0-10VDC or 4-20mA; 16-bit resolution.
  • External Relay Box
    4-channel external relay box model 8501.
  • Relay Board
    Internal 8-channel relay board.
  • Relay Modules
    Input/output solid-state (AC/DC) relays.
  • Clock Module
    Time and Date Clock.
  • High speed (HS)
    100 samples/second conversion rate; high-speed process control applications.
  • EZ-LINK™
    PC software; facilitates configuration and Scale Basic™ programming.
  • IS Barriers
    Hazard location intrinsic safety barriers.
  • 440 specification sheet

There are no reviews yet for this product. Write a Review

Product Bulletins