spacer
Click to call us

Browse All Load Cells

Below is a selection of load cells that we offer, this is only a partial list. If you don’t see a sensor that meets your force measurement requirements simply call us and we will assist you.

The number of load cells shown can be narrowed down by load measurement direction and or style of load cell.

Filter Your Selection:
 

All Load Cells

S-Type Load Cell - XTS4

S-Type Load Cell - XTS4

Load Cell Central's XTS4 S-type load cell is a versatile unit designed for use in either tension or compression. Constructed of a plated alloy steel, the combined error including the effects of non-linearity and hysteresis is less than 0.02% of the load cell's capacity.

Vessel, Hopper, Silo Scale Load Cell - SPWE

Vessel, Hopper, Silo Scale Load Cell - SPWE

The SPWE is an integrated load cell and mount designed for vessel weighing applications. It can accept a 3 degree off axis angle and remain accurate. Low profile design makes it ideal for existing applications where headroom is limited.

Scale Foot Load Cell - SFLC

Scale Foot Load Cell - SFLC

Easily convert a table, platform, hopper, tank, or conveyor into a scale by replacing the machinery feet with Scale Feet load cells.

Sub-Miniature Load Cell - VLPA

Sub-Miniature Load Cell - VLPA

Load Cell Central's Model VLPA low profile load cell is designed to measure load ranges from 25 to 1000 lbs. With subminiature dimensions, including diameters from .375" to 0.75" and height of only 0.25", these force transducers are easily incorporated into systems having limited space.

Miniature Button Type Load Cell - XBD

Miniature Button Type Load Cell - XBD

Load Cell Central's XBD miniature load cells are bonded foil strain gage transducers designed for low cost production and testing applications (e.g. press calibration). Engineered for compression force measurements up to 50,000 lbs., this model achieves a maximum non-linearity of 0.25% full scale. Precision gaging techniques and stainless steel construction provide excellent long-term stability and reliability under severe operating conditions.

Compression Load Cell - LPSWC-B

Compression Load Cell - LPSWC-B

Load Cell Central's compression-only shear web load cell model LPSWC-B is ideal for structural and materials testing, and compressive force measurement applications.

Thru Hole Load Cell - VCD

Thru Hole Load Cell - VCD

3" O.D. and capacities from 2,000 to 50,000 lb the model VCD Donut Shaped Load Cell features a smooth thru-hole design perfect for applications which require the load structure to pass directly through the cell.

Universal Shear Web - SRP4

Universal Shear Web - SRP4

Pancake compression and tension load cell model SRP4 has unlimited uses for industrial applications. Mounting using the outer bolt hole circle, the cell is center-loaded in either direction. Compression load button available.

Tension & Compression - CTD

Tension & Compression - CTD

Load Cell Central's low-profile CTD, with its height of 1" for all capacities, is ideal for "straight through" tension weighing applications in confined areas where height is a factor.

Submersible S-Type Load Cell - HRS

Submersible S-Type Load Cell - HRS

The HRS hermetically sealed 17-4 stainless steel load cell is submersible to 95psi and can be used in both tension and compression.

Stainless Steel Dual Stud Tension & Compression - HTC

Stainless Steel Dual Stud Tension & Compression - HTC

Load Cell Central's HTC Dual Stud Mount load cell is supplied with a stud at each end for easy in-line mounting in ranges from 50 lbs. through 10,000 lbs.

Rod-End Load Cell - RELC-T

Rod-End Load Cell - RELC-T

Load Cell Central's RELC-T rod-end load cell is a versatile unit designed for use in either tension or compression. Designed to attach directly on hydraulic cylinders.

Double Ended Shear Beam Alloy Steel - DES1

Double Ended Shear Beam Alloy Steel - DES1

For use with our Duramount 7-S3 Mounts, our double ended beam load cell DES1 is well suited for hopper and tank weighing applications.

Mini-Gram Beam - SLCB/LCBF

Mini-Gram Beam - SLCB/LCBF

SLCB (semiconductor gages, 25-1000 grams) and LCBF (foil strain gages) are engineered to measure very low bending forces and still achieve an impressive 0.1% full scale non-linearity and hysteresis.

Double Ended Beam Stainless Steel Hermetically Sealed - DESX

Double Ended Beam Stainless Steel Hermetically Sealed - DESX

Interchangeable with 65016W, 65016WH, the DESX load cell is well suited for outdoor and washdown areas.

Double Ended Beam Load Cell - RVSC

Double Ended Beam Load Cell - RVSC

Load Cell Central's model RVSC is designed for multiple load cell applications such as medium to high capacity bin, silo, and hopper weighing applications.

Miniature Canister Load Cell - DTC

Miniature Canister Load Cell - DTC

Load Cell Central's model DTC is a miniature canister load cell ideal for limited space or portable applications.

Low Force Load Cell - TCT1

Low Force Load Cell - TCT1

TCT1 low capacity universal load cell is a versatile force sensor designed for use in either tension or compression applications.

Miniature Load Cell - RSTC

Miniature Load Cell - RSTC

Load Cell Central's RSTC universal miniature load cell is a versatile sensor designed for use in either tension or compression.

Submersible Load Cell - DSLC

Submersible Load Cell - DSLC

The DSLC submersible load cell is capable of depths to 300', designed for measuring tension or compression loads in subsea applications.

Universal Load Cell - LPSW-B

Universal Load Cell - LPSW-B

Load Cell Central's universal shear web load cell model LPSW-B is ideal for structural and materials testing, and force measurement applications.

Single Point Load Cell - GCB3

Single Point Load Cell - GCB3

GCB3 low profile off-center load cell is designed for weighing platforms, hanging scales, bench scales, and many other low capacity scale applications.

Single Point Load Cell - ESP4

Single Point Load Cell - ESP4

The LCC-ESP4 single point load cell is designed for electronic bench and platform scales, medical scales, and any application where a low profile load cell design is a must.

Tension Link - DCL10

Tension Link - DCL10

Load Cell Central's versatile LCC-DCL10 Tension Link load cell is designed for use in harsh environments. Employed in a wide variety of lift tests, towing tension, cable tension, crane scale, hoist scale, and tensile testing systems.

Single Ended Bending Beam - SBSA

Single Ended Bending Beam - SBSA

Load Cell Central's model SBSA is designed for multiple load cell applications such as medium and low capacity vessel weighing applications and bagging scales.

Crane Overload Limiter Clamp-On Load Cell - DLWS

Crane Overload Limiter Clamp-On Load Cell - DLWS

The DLWS load cell is designed to clamp onto a static cable / wire rope allowing for a simple way of detecting overload conditions on a crane, hoist, or winch.

S-Beam Stainless Steel Hermetically Sealed - XLS2-HSS

S-Beam Stainless Steel Hermetically Sealed - XLS2-HSS

Load Cell Central's XLS2-HSS is a stainless steel and hermetically sealed S-Type load cell which can be used in either tension or compression applications.

Load Pin - CLP Series

Load Pin - CLP Series

Load Cell Central's versatile CLP Series load measuring pins can be used in hoist, cranes, overload limiters, shackles, and hydraulic cylinders. Load cell pins are custom made so they replace an existing pin with little or no modifications needed to the existing equipment.

Stainless Steel Hermetically Sealed Single Point Load Cell- STSP1

Stainless Steel Hermetically Sealed Single Point Load Cell- STSP1

The STSP1 stainless steel load cell is designed for harsh environments and high accuracy applications, with a combined error of 0.017% FS it is the most accurate load cell of its type on the market.

Stainless Steel Tension & Compression Load Cell - UCLD

Stainless Steel Tension & Compression Load Cell - UCLD

Load Cell Central's UCLD is a stainless steel and hermetically sealed canister load cell which can be used in either tension or compression applications. Applications include but are not limited to tensile testing, crane scales, vessel weighing, and batching processes.

Hermetically Sealed Bending Beam - HBBG

Hermetically Sealed Bending Beam - HBBG

The HBBG load cell is designed for harsh industrial applications such as food, chemical, & pharmaceutical industries.

Stainless Steel Canister - PSCG

Stainless Steel Canister - PSCG

The PSCG is a hermetically sealed, stainless steel compression type canister load cell. Its linearity, rugged design, and resistance to off-axis loading errors.

Single Point Load Cell - KCBH2

Single Point Load Cell - KCBH2

Load Cell Central's KCBH2 single point load cells are designed for use in commercial platform scales and precision weighing machines, such as bagging machinery, conveyor scales and medical scales with capacities from 100kg to 1,000kg.

Single Ended Shear Beam - LCS9

Single Ended Shear Beam - LCS9

Load Cell Central's model LCS9 is designed for multiple load cell applications such as industrial floor scales, barrel scales, or medium and low capacity vessel weighing applications.

Stainless Steel Shear Beam - LCS11

Stainless Steel Shear Beam - LCS11

The LCS11 is stainless steel and has a welded seal, ideal for harsh wash-down and corrosive environments such as in the food and chemical industries.

Alloy Steel Low Cost Compression Load Cell - SWCM

Alloy Steel Low Cost Compression Load Cell - SWCM

The SWCM versatile precision pancake load cell is designed for compression loads in materials testing, force calibration of presses, and many technical and industrial compressive force measurement applications.

Wireless Tension Link Load Cell / Crane Scale - WL-CTL2

Wireless Tension Link Load Cell / Crane Scale - WL-CTL2

The WL-CTL2 wireless tension link load cell is ideal for weighing and lifting applications such as with cranes, hoists, and winching, that may not lend themselves to standard cabled load cells--- where the cable could get damaged or where it may not be safe to be close to the load cell during a lift.

Small Diameter Button Load Cell - DTB

Small Diameter Button Load Cell - DTB

Load Cell Central's Model DTB miniature canister column type load cells are designed for production and testing applications (for example, press calibration).

Low-Profile Dynamometer Load Cell - DCL12

Low-Profile Dynamometer Load Cell - DCL12

Our lowest profile dynamometer tension link load cell. The lifting eyes are rotated 90 degrees from one another giving the dynamometer another axis of movement which is essential for swaying loads.

Miniature S-Type Load Cell Tension & Compression - JRS1

Miniature S-Type Load Cell Tension & Compression - JRS1

The JRS1 miniature S-Type load cell has female threaded holes for easy in-line mounting in ranges from 2.5 through 500 newtons (0.5 to 112 pounds)

Load Shackle Load Cell - STLC

Load Shackle Load Cell - STLC

Our load shackle load cells are built using industry standard Crosby™ shackles. Ideal for winching, rigging, and mooring applications, they can be installed in any in-line pulling application to measure the forces being applied to the load pin sensor.

Wireless Load Shackle - WL-STLC

Wireless Load Shackle - WL-STLC

Our wireless load shackles have a range of up to 600 meters (clear line of sight). Built using industry standard Crosby™ shackles makes it ideal for lifting, hoisting, and winching applications.

Crane Overload Limiter Load Cell

Crane Overload Limiter Load Cell

The DLWS load cell is designed to clamp onto a static cable / wire rope allowing for a simple way of detecting overload conditions on a crane, hoist, or winch. Optional electronics can be used to provide relay ouptuts to shut down the lifting operation or sound an audible alarm or light.

Stainless Steel Single Point Load Cell - GCB3

Stainless Steel Single Point Load Cell - GCB3

The GCB3-SS low cost, low profile off center* load cell is designed for harsh environments it is manufactured from stainless steel and sealed to IP67.

Premium S-Type Load Cell Tension and Compression - JQRT

Premium S-Type Load Cell Tension and Compression - JQRT

Load Cell Central's JQRT premium S-type load cell is designed for the test measurements market. The load cell is constructed of aluminum in the lower capacities 50 to 1,000 pounds, and capacities from 2,000 to 5,000 pounds are stainless steel.

Donut Load Cell - PCD

Donut Load Cell - PCD

1.5" O.D. and capacities from 100 to 2,000 lb the PCD donut load cell features a smooth thru-hole design perfect for applications which require the fasteners to pass directly through the load cell.

Load Washer Load Cell - RCD

Load Washer Load Cell - RCD

1" O.D. and capacities from 50 to 500 lb the RCD miniature donut shaped load cell features a through-hole design perfect for applications which require the bolt / fastener to pass directly through the load washer load cell.

Through Hole Load Cell - TCD

Through Hole Load Cell - TCD

2" O.D. and capacities from 250 to 10,000 lb the TCD through hole load cell features a thru-hole design perfect for applications such as fastener testing, or measuring clamping forces

Underwater Load Cell Tension Link - UWTL

Underwater Load Cell Tension Link - UWTL

Load Cell Central's UWTL Series underwater load cells are built to order. Typical applications include marine towing, oilfield, salvage, construction, and mooring load monitoring.

Request A Quote!
For Immediate Assistance Call
1-800-LOADCEL
or
Complete Our Form