High Capacity Load Cells
from 25,000 to 1 million pounds & higher
High capacity load cells are used for pile testing, concrete batch plants, mooring testing, and laboratory destructive tests.
In our Electronics section we carry a wide range of weighing electronics that can be used with our load cells such as digital displays, analog and digital output signal conditioners, wireless load cell interfaces, and load cell-to-computer systems.
High Capacity Load Cells
The SPWE is an integrated load cell and mount designed for vessel weighing applications. It can accept a 3 degree off axis angle and remain accurate. Low profile design makes it ideal for existing applications where headroom is limited.
Load Cell Central's XBD miniature load cells are bonded foil strain gage transducers designed for low cost production and testing applications (e.g. press calibration). Engineered for compression force measurements up to 50,000 lbs., this model achieves a maximum non-linearity of 0.25% full scale. Precision gaging techniques and stainless steel construction provide excellent long-term stability and reliability under severe operating conditions.
Load Cell Central's compression-only shear web load cell model LPSWC-B is ideal for structural and materials testing, and compressive force measurement applications.
3" O.D. and capacities from 2,000 to 50,000 lb the model VCD Donut Shaped Load Cell features a smooth thru-hole design perfect for applications which require the load structure to pass directly through the cell.
Pancake compression and tension load cell model SRP4 has unlimited uses for industrial applications. Mounting using the outer bolt hole circle, the cell is center-loaded in either direction. Compression load button available.
The HRS hermetically sealed 17-4 stainless steel load cell is submersible to 95psi and can be used in both tension and compression.
Load Cell Central's RELC-T rod-end load cell is a versatile unit designed for use in either tension or compression. Designed to attach directly on hydraulic cylinders.
For use with our Duramount 7-S3 Mounts, our double ended beam load cell DES1 is well suited for hopper and tank weighing applications.
Interchangeable with 65016W, 65016WH, the DESX load cell is well suited for outdoor and washdown areas.
Load Cell Central's model RVSC is designed for multiple load cell applications such as medium to high capacity bin, silo, and hopper weighing applications.
Load Cell Central's model DTC is a miniature canister load cell ideal for limited space or portable applications.
Load Cell Central's universal shear web load cell model LPSW-B is ideal for structural and materials testing, and force measurement applications.
Load Cell Central's versatile LCC-DCL10 Tension Link load cell is designed for use in harsh environments. Employed in a wide variety of lift tests, towing tension, cable tension, crane scale, hoist scale, and tensile testing systems.
The DLWS load cell is designed to clamp onto a static cable / wire rope allowing for a simple way of detecting overload conditions on a crane, hoist, or winch.
Load Cell Central's versatile CLP Series load measuring pins can be used in hoist, cranes, overload limiters, shackles, and hydraulic cylinders. Load cell pins are custom made so they replace an existing pin with little or no modifications needed to the existing equipment.
Load Cell Central's UCLD is a stainless steel and hermetically sealed canister load cell which can be used in either tension or compression applications. Applications include but are not limited to tensile testing, crane scales, vessel weighing, and batching processes.
The PSCG is a hermetically sealed, stainless steel compression type canister load cell. Its linearity, rugged design, and resistance to off-axis loading errors.
The SWCM versatile precision pancake load cell is designed for compression loads in materials testing, force calibration of presses, and many technical and industrial compressive force measurement applications.
The WL-CTL2 wireless tension link load cell is ideal for weighing and lifting applications such as with cranes, hoists, and winching, that may not lend themselves to standard cabled load cells--- where the cable could get damaged or where it may not be safe to be close to the load cell during a lift.
Load Cell Central's Model DTB miniature canister column type load cells are designed for production and testing applications (for example, press calibration).
Our lowest profile dynamometer tension link load cell. The lifting eyes are rotated 90 degrees from one another giving the dynamometer another axis of movement which is essential for swaying loads.
Our load shackle load cells are built using industry standard Crosby™ shackles. Ideal for winching, rigging, and mooring applications, they can be installed in any in-line pulling application to measure the forces being applied to the load pin sensor.
Our wireless load shackles have a range of up to 600 meters (clear line of sight). Built using industry standard Crosby™ shackles makes it ideal for lifting, hoisting, and winching applications.
The DLWS load cell is designed to clamp onto a static cable / wire rope allowing for a simple way of detecting overload conditions on a crane, hoist, or winch. Optional electronics can be used to provide relay ouptuts to shut down the lifting operation or sound an audible alarm or light.
Load Cell Central's UWTL Series underwater load cells are built to order. Typical applications include marine towing, oilfield, salvage, construction, and mooring load monitoring.