Mid Range Capacity Load Cells
from 200 to 20,000 Pounds
This load cell selection includes midrange capacity load cells used for applications such as platform scales, tensile testers, bolt force measurement, and hopper scales.
In our Electronics section we carry a wide array of weighing electronics that can be used with our load cells such as digital displays, analog and digital output signal conditioners, wireless load cell interfaces, and USB load cell-to-computer systems.
Mid-Range Load Cells
Load Cell Central's XTS4 S-type load cell is a versatile unit designed for use in either tension or compression. Constructed of a plated alloy steel, the combined error including the effects of non-linearity and hysteresis is less than 0.02% of the load cell's capacity.
The SPWE is an integrated load cell and mount designed for vessel weighing applications. It can accept a 3 degree off axis angle and remain accurate. Low profile design makes it ideal for existing applications where headroom is limited.
Easily convert a table, platform, hopper, tank, or conveyor into a scale by replacing the machinery feet with Scale Feet load cells.
Load Cell Central's Model VLPA low profile load cell is designed to measure load ranges from 25 to 1000 lbs. With subminiature dimensions, including diameters from .375" to 0.75" and height of only 0.25", these force transducers are easily incorporated into systems having limited space.
Load Cell Central's XBD miniature load cells are bonded foil strain gage transducers designed for low cost production and testing applications (e.g. press calibration). Engineered for compression force measurements up to 50,000 lbs., this model achieves a maximum non-linearity of 0.25% full scale. Precision gaging techniques and stainless steel construction provide excellent long-term stability and reliability under severe operating conditions.
Load Cell Central's compression-only shear web load cell model LPSWC-B is ideal for structural and materials testing, and compressive force measurement applications.
3" O.D. and capacities from 2,000 to 50,000 lb the model VCD Donut Shaped Load Cell features a smooth thru-hole design perfect for applications which require the load structure to pass directly through the cell.
Pancake compression and tension load cell model SRP4 has unlimited uses for industrial applications. Mounting using the outer bolt hole circle, the cell is center-loaded in either direction. Compression load button available.
Load Cell Central's low-profile CTD, with its height of 1" for all capacities, is ideal for "straight through" tension weighing applications in confined areas where height is a factor.
The HRS hermetically sealed 17-4 stainless steel load cell is submersible to 95psi and can be used in both tension and compression.
Load Cell Central's HTC Dual Stud Mount load cell is supplied with a stud at each end for easy in-line mounting in ranges from 50 lbs. through 10,000 lbs.
Load Cell Central's RELC-T rod-end load cell is a versatile unit designed for use in either tension or compression. Designed to attach directly on hydraulic cylinders.
For use with our Duramount 7-S3 Mounts, our double ended beam load cell DES1 is well suited for hopper and tank weighing applications.
Interchangeable with 65016W, 65016WH, the DESX load cell is well suited for outdoor and washdown areas.
Load Cell Central's model RVSC is designed for multiple load cell applications such as medium to high capacity bin, silo, and hopper weighing applications.
Load Cell Central's RSTC universal miniature load cell is a versatile sensor designed for use in either tension or compression.
The DSLC submersible load cell is capable of depths to 300', designed for measuring tension or compression loads in subsea applications.
Load Cell Central's universal shear web load cell model LPSW-B is ideal for structural and materials testing, and force measurement applications.
GCB3 low profile off-center load cell is designed for weighing platforms, hanging scales, bench scales, and many other low capacity scale applications.
The LCC-ESP4 single point load cell is designed for electronic bench and platform scales, medical scales, and any application where a low profile load cell design is a must.
Load Cell Central's versatile LCC-DCL10 Tension Link load cell is designed for use in harsh environments. Employed in a wide variety of lift tests, towing tension, cable tension, crane scale, hoist scale, and tensile testing systems.
Load Cell Central's model SBSA is designed for multiple load cell applications such as medium and low capacity vessel weighing applications and bagging scales.
The DLWS load cell is designed to clamp onto a static cable / wire rope allowing for a simple way of detecting overload conditions on a crane, hoist, or winch.
Load Cell Central's XLS2-HSS is a stainless steel and hermetically sealed S-Type load cell which can be used in either tension or compression applications.
Load Cell Central's versatile CLP Series load measuring pins can be used in hoist, cranes, overload limiters, shackles, and hydraulic cylinders. Load cell pins are custom made so they replace an existing pin with little or no modifications needed to the existing equipment.
Load Cell Central's UCLD is a stainless steel and hermetically sealed canister load cell which can be used in either tension or compression applications. Applications include but are not limited to tensile testing, crane scales, vessel weighing, and batching processes.
The HBBG load cell is designed for harsh industrial applications such as food, chemical, & pharmaceutical industries.
The PSCG is a hermetically sealed, stainless steel compression type canister load cell. Its linearity, rugged design, and resistance to off-axis loading errors.
Load Cell Central's KCBH2 single point load cells are designed for use in commercial platform scales and precision weighing machines, such as bagging machinery, conveyor scales and medical scales with capacities from 100kg to 1,000kg.
Load Cell Central's model LCS9 is designed for multiple load cell applications such as industrial floor scales, barrel scales, or medium and low capacity vessel weighing applications.
The LCS11 is stainless steel and has a welded seal, ideal for harsh wash-down and corrosive environments such as in the food and chemical industries.
The SWCM versatile precision pancake load cell is designed for compression loads in materials testing, force calibration of presses, and many technical and industrial compressive force measurement applications.
The WL-CTL2 wireless tension link load cell is ideal for weighing and lifting applications such as with cranes, hoists, and winching, that may not lend themselves to standard cabled load cells--- where the cable could get damaged or where it may not be safe to be close to the load cell during a lift.
Load Cell Central's Model DTB miniature canister column type load cells are designed for production and testing applications (for example, press calibration).
Our lowest profile dynamometer tension link load cell. The lifting eyes are rotated 90 degrees from one another giving the dynamometer another axis of movement which is essential for swaying loads.
Our load shackle load cells are built using industry standard Crosby™ shackles. Ideal for winching, rigging, and mooring applications, they can be installed in any in-line pulling application to measure the forces being applied to the load pin sensor.
Our wireless load shackles have a range of up to 600 meters (clear line of sight). Built using industry standard Crosby™ shackles makes it ideal for lifting, hoisting, and winching applications.
The DLWS load cell is designed to clamp onto a static cable / wire rope allowing for a simple way of detecting overload conditions on a crane, hoist, or winch. Optional electronics can be used to provide relay ouptuts to shut down the lifting operation or sound an audible alarm or light.
The GCB3-SS low cost, low profile off center* load cell is designed for harsh environments it is manufactured from stainless steel and sealed to IP67.
Load Cell Central's JQRT premium S-type load cell is designed for the test measurements market. The load cell is constructed of aluminum in the lower capacities 50 to 1,000 pounds, and capacities from 2,000 to 5,000 pounds are stainless steel.
1.5" O.D. and capacities from 100 to 2,000 lb the PCD donut load cell features a smooth thru-hole design perfect for applications which require the fasteners to pass directly through the load cell.
1" O.D. and capacities from 50 to 500 lb the RCD miniature donut shaped load cell features a through-hole design perfect for applications which require the bolt / fastener to pass directly through the load washer load cell.
2" O.D. and capacities from 250 to 10,000 lb the TCD through hole load cell features a thru-hole design perfect for applications such as fastener testing, or measuring clamping forces
Load Cell Central's UWTL Series underwater load cells are built to order. Typical applications include marine towing, oilfield, salvage, construction, and mooring load monitoring.