Load Cell Central is constantly improving and designing products to increase accuracy, ease of use, cost effectiveness, and products to fill niche markets. Check back soon to browse our newest developments, this page is updated frequently.
The WL-CTL2 wireless tension link load cell is ideal for weighing and lifting applications such as with cranes, hoists, and winching, that may not lend themselves to standard cabled load cells--- where the cable could get damaged or where it may not be safe to be close to the load cell during a lift.
The DLWS load cell is designed to clamp onto a static cable / wire rope allowing for a simple way of detecting overload conditions on a crane, hoist, or winch.
Before the introduction of the SST1 load cell testing instrument, troubleshooting a load cell could take 10-15 minutes or even longer, tediously taking lots of measurements at different points, and making calculations.
Load Cell Central's versatile CLP Series load measuring pins can be used in hoist, cranes, overload limiters, shackles, and hydraulic cylinders. Load cell pins are custom made so they replace an existing pin with little or no modifications needed to the existing equipment.
The SPWE is an integrated load cell and mount designed for vessel weighing applications. It can accept a 3 degree off axis angle and remain accurate. Low profile design makes it ideal for existing applications where headroom is limited.
Directly connect a load cell or scale system to a computer, and utilize the free setup software and data logging features. Easily import the logged data to Excel where it can be graphed or manipulated to the user's requirements.
Directly connect a load cell or scale to a computer, PLC, or process control system. Free setup/calibration software with data logging features. The DSC is designed for OEM customers needing a compact, economical, and easy to use load cell digitizing module.
The Duramount 30 is one of the most cost-effective stainless steel weighing assemblies available and comes in standard capacities of 500, 1K, 2.5K, 4K, 5K, and 10K lb. It is designed for all low-profile medium capacity applications in harsh environments or outdoors.
The Duramount 31 mounting assemblies are low cost and designed for various weighing applications where heavy wash down is anticipated, such as washdown in the food, chemical, and pharmaceutical industries.
The BHM hand held indicator has been designed to be easy to setup and use, all the menu screens are self prompting making calibration simple. The portable load cell display is economical and proudly made in the USA.
Easily convert a table, platform, hopper, tank, or conveyor into a scale by replacing the machinery feet with Scale Feet load cells.
Our lowest profile dynamometer tension link load cell. The lifting eyes are rotated 90 degrees from one another giving the dynamometer another axis of movement which is essential for swaying loads.
The DSLC submersible load cell is capable of depths to 300', designed for measuring tension or compression loads in subsea applications.
The LCD20 load cell amp outputs 0-10Vdc & 4-20mA, it is PC configured so all calibration and setup is done through the free LC Toolkit software. Two relay outputs and two digital inputs are standard features.
Our load shackle load cells are built using industry standard Crosby™ shackles. Ideal for winching, rigging, and mooring applications, they can be installed in any in-line pulling application to measure the forces being applied to the load pin sensor.